Oil Capacity - Honda HSM1180i Manuel De L'utilisateur

Engine oil change
If the engine oil is dirty, engine wear will occur more rapidly. Change
the oil at designated intervals. Maintain the oil at the proper level.

OIL CAPACITY:

How to change the oil:
1. Remove the oil filler cap/dipstick and the drain bolt.
Drain the oil while the engine is still warm to assure rapid and
complete draining.
2. Install the drain bolt securely using a new sealing washer.
If you drain the oil immediately after stopping the engine, its
temperature will be high and may cause burns.
3. Fill with new recommended oil (see page
4. After changing the oil, securely tighten the oil filler cap/dipstick.
Wash your hands with soap and water after handling used oil.
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for recycling. Do not throw in the trash or pour it
onto the ground.
68
1.1 (1.2 US qt , 1.0 Imp qt)
OIL FILLER CAP
ENGINE OIL
DRAIN BOLT
SEALING WASHER
OIL FILLER CAP/DIPSTICK
32 ) up to the upper limit.
UPPER LIMIT