Honda HSM1590i Manuel De L'utilisateur page 70

AUGER HOUSING CONTROL SWITCH
AUGER CLUTCH SWITCH
STOP (OFF)
ENGINE SWITCH
If you cannot change the reset position properly or if you want to
return the reset position to the factory set position, consult with your
authorized Honda snowblower dealer.
− 4. Operate the auger housing
control switch to set the auger
housing in a position you want.
− 5. Push the auger clutch switch. The
reset switch indicator goes off
and the reset position is changed.
− 6. Turn the engine switch to the
STOP position.
Note that you cannot operate the
snowblower without turning the
engine switch to the STOP
position once.
67