Honda HSM1590i Manuel De L'utilisateur page 103

Can not clear snow well.
SYMPTOM
Hard to drive the
snowblower in the
forward direction
while clearing the
snow.
Snow does not
come out from the
snow discharge
chute.
Hard to collect the
snow to clear.
Blower does not
rotate.
Auger does not
rotate.
100
POSSIBLE CAUSE
Auger lock bolt is broken.
Auger housing height is
not adjusted properly.
Snow is stuck in the auger
and the related parts of
the snowblower.
Snow discharge chute is
clogged.
Snow is stuck on the
auger.
Blower lock bolt is broken.
Drive motor overheated
by operation under
excessive load, which
armed the protection
function.
Blower does not rotate
when pressing the auger
clutch switch.
Auger lock bolt is broken.
Drive motor overheated
by operation under
excessive load, which
armed the protection
function.
Blower does not rotate
when pressing the auger
clutch switch.
REMEDY
Replace the auger lock bolt (see
page 79).
Adjust the auger housing height
in the proper position (see page
43 45). −
Remove the snow from the
underside of the auger housing
(see page 60).
Use the snow drop bar and
remove the snow from the snow
discharge chute (see page 60).
Remove the snow from the
auger and the related parts (see
page 60).
Replace the blower lock bolt
(see page 79).
Turn the engine switch to the
OFF position and wait for a
while before turning it to the ON
position again. Motor protection
function (see page 63).
Switch or electromagnetic
clutch might be faulty. Consult
with an authorized Honda dealer.
Replace the auger lock bolt (see
page 79).
Turn the engine switch to the
OFF position and wait for a
while before turning it to the ON
position again. Motor protection
function (see page 63).
Switch or electromagnetic
clutch might be faulty. Consult
an authorized Honda dealer.