Honda HSM1590i Manuel De L'utilisateur page 108

Emergency transport
You can move the snowblower by pushing or pulling it without engine
power.
Place the snowblower on the level ground after transportation and use
a new cotter pin when replacing the wheel pin.
1. Remove the cotter pins from the rear right and left wheels.
2. Remove the wheel pins from the rear right and left wheels.
3. The track rotates freely, allowing the operator to move the
snowblower without engine power.
Before removing the wheel pins, make sure to stop the rotating
parts, stop the engine and remove the engine switch key.
Do not remove the wheel pins on the slope. The snowblower may
move unintentionally, causing injury.
WHEEL PIN
COTTER PIN
105