Controls - Honda HSM1590i Manuel De L'utilisateur

CONTROLS

4.
Engine switch
Use the engine switch to turn the ignition system on for starting, and
to stop the engine.
STOP (OFF): Engine switch position to stop the engine.
(The engine switch key can be removed/inserted with the
switch in this position.)
ON: Engine switch position while the engine is running.
Each electric circuit comes on.
(It produces a clicking sound with the switch set in this
position.)
START: Engine switch position to start the engine. The starter
motor turns. Release the engine switch key, and the
engine switch automatically returns to the ON position.
STOP
(OFF)
ENGINE SWITCH
Drive control warning indicator (red)
The drive control warning indicator (red) turns on for a few seconds
when the engine switch is turned from OFF to ON. The indicator
goes off while the engine is running. If the indicator does not come
on when starting and it comes on or blinks while the engine is
running, contact your authorized Honda snowblower dealer.
DRIVE CONTROL WARNING
INDICATOR (red)
14
ON START