Honda HSM1590i Manuel De L'utilisateur page 51

Operation
1. Start the engine (see pages
2. Select the snow clearing work mode.
− 1. Check that the main shift lever is in the N (neutral) position.
− 2. Select the appropriate work mode to clear the snow by turning
the mode selector switch to either the SELF, POWER, or AUTO
position.
Note that the operation and performance of the snowblower differ
according to the work mode you select. Select the appropriate
work mode for your situation (see pages
characteristics of each mode).
Tips for selecting the work mode:
AUTO mode: see page
1) Not familiar with operating the snowblower.
2) Does not want to operate the various switches while clearing the
snow.
3) Want to clear the snow as quietly as possible.
4) Want the auger to rise up as little as possible.
POWER mode: see page
1) Want to adjust the traveling speed automatically according to the
workload while clearing the snow.
2) Want to throw the snow far from the snowblower.
3) Want to finish clearing the snow as quickly as possible.
SELF mode: see page
Want to operate the switches as you like.
48
38
MODE SELECTOR SWITCH
SELF
49 .
52 .
55 .
through 40 ).
POWER
17 and 18 for the
AUTO