Honda HSM1590i Manuel De L'utilisateur page 53

DRIVE CLUTCH LEVER
AUGER CLUTCH SWITCH
The auger and blower will start to turn when the drive clutch lever
and auger clutch switch is operated. Check around the snowblower
for safety before operating the lever and switch.
50
N (neutral)
MAIN SHIFT LEVER
3) Check that the main shift lever is in the
N (neutral) position and squeeze the
drive clutch lever.
4) Push the auger clutch switch to
operate on the auger and blower.
The indicator (green) comes on
when you push the auger clutch
switch.
When the auger clutch switch is
pushed for four seconds or longer,
the protection function gets armed.
This stops the auger and blower
from turning.
The auger and blower keep turning
while the drive clutch lever is
squeezed. Push the auger clutch
switch again to stop the auger and
blower. (Interlocking operation of
the drive clutch lever and auger
clutch switch)