Self-diagnosis function
When a trouble occurs
When a trouble occurs to the snowblower during running, the drive
control warning indicator (orange) repeatedly blinks a number that
corresponds to the type of trouble. Turn the engine switch to the
STOP position and turn it to the ON position again. If the
snowblower is faulty, the drive control warning indicator (red)
comes on and the drive control warning indicator (orange) repeats
blinking the number that corresponds to the type of trouble (see
pages
95
and
DRIVE CONTROL WARNING
INDICATOR (red)
The drive control warning indicator (orange) comes on for 0.5
seconds, then it goes off for 0.5 seconds. It repeatedly blinks a
number corresponding to the type of trouble, then it goes off for 3
seconds. The drive control warning indicator (orange) repeats this
cycle of blinking and going off.
0.5 sec
LIGHT ON
LIGHT OFF
Example: When the indicator blinks twice:
It comes on for 0.5 seconds, goes off for 0.5 seconds, comes on for
0.5 seconds again, and then goes off for 3.5 seconds. The indicator
repeats this cycle of operation.
94
96
).
0.5 sec
0.5 sec
3.5 sec
ONE CYCLE
DRIVE CONTROL WARNING
INDICATOR (orange)