Honda HSM1590i Manuel De L'utilisateur page 83

Auger/blower replacement
The auger is subject to wear as it contacts the road surface and gravel.
A snowblower with a worn auger performs poorly. Replace a worn
auger with a new one.
When the auger or blower is deformed, do not try to correct it with
external force. That can cause cracks and injury as a result.
Replace the auger and blower with new ones if they contact the
housing while turning, when the snow clearing performance
becomes poor, or when the snow is not thrown far enough.
Consult with your authorized Honda snowblower dealer for auger
and blower replacement.
80
WEAR
CUTOUTS
SERVICE LIMIT
T h e s n o w c l e a r i n g
performance decreases as
the auger becomes worn.
Replace the auger with a
new one if it is worn and
shows the poor performance
in catching the snow.
To prevent the early failure
of the auger, do not let the
auger contact the road
surface.