Electrical Connections; Input Power Connector; Gauge - Serial Line Connection; Gauge Connector - Agilent Technologies TPS-mobile 969-8400 Notice De Mode D'emploi

Masquer les pouces Voir aussi pour TPS-mobile 969-8400:
Table des Matières

Publicité

ISTRUZIONI ORIGINALI

ELECTRICAL CONNECTIONS

Input Power Connector

The following figure shows the input power con-
nector.
CONNECTION TO MAIN
Gauge – Serial Line Connection
GAUGE CONNECTION

Gauge Connector

TPS-mobile is equipped with new generation
gauge reading card able to drive/read a Varian
Full Range Gauge FRG-700.
The FRG-700 Full Range Gauge is a combined
technologies gauge (Inverted Magnetron plus Pi-
rani Gauge).
FRG-700 measure from 5x10
-9
phere (3.8x10
Torr to atmosphere) and its tem-
perature range goes from 5°C to 55°C [41°-
131°F].
Pressure data is available on two independent
reading channels:
1.
Serial communication line (Win 224)
Retention
Spring
Power cord
plug
NOTE
PN 969-8433 is already supplied with an
integrated power cord so you don't need
to perform this step.
Gauge port
Serial port
-9
mbar to atmos-
2.
TMP controller display.
Pressure gauge can be connected/disconnected
from the TPS-mobile during normal operation.
FRG-700 gauge dimension
J2 – Serial Connector
This connector provides the connection for RS –
232 and serial line.
J2 Pin-out:
96/105
TECHNICAL INFORMATION
Gauge Connector
87-901-005-01(A)

Publicité

Table des Matières
loading

Table des Matières