Publicité
4
Instructions for Use
Preparation for Installation
For longer pipes increase pipe diameter. Pipe weights must not rest
on the pump.
In the final length use flexible pipes or pipe fittings.
WARNING!
This pipe must be descending, to avoid the condensate going back to the tank.
Do not connect ball valves to this pipeline. Do not clog the outlet.
CAUTION!
This symbol identifies the exhaust port.
NOTE
Electrical connection
Check the main voltage and frequency in use to correspond to the
data stamped on the pump name plate.
Make sure the grounding is correctly done.
MS120 Single Stage Rotary Vane Pumps (G2571-64000) User Manual/X3702-90000 (A) 144/188
Publicité
Chapitres
