IKEA KALLBODA Mode D'emploi page 14

ENGLISH
Display
3
Timer programming and setting buttons
4
Programme buttons and additional functions
5
Start button
6
Water supply display
7
Door handle
8
Special salt refill indicator
9
Rinse aid refill indicator
10
11
1 Depending on the appliance specifications
Symbols on the display
The display shows the following symbols depending on the
model. See here for an explanation.
SYMBOL DESCRIPTION
If the symbol for machine care lights up
on the display, run machine care.
→ "Machine Care
If the rinse aid refill indicator lights up
on the display, top up with rinse aid.
→ "Adding rinse aid", Page 20
If the special salt refill indicator lights up
on the display, add special salt to the dis-
penser for special salt just before the
programme starts.
→ "Adding special salt", Page 20
When using for the first time, the symbol
lights up on the display and then goes
out again. The appliance has no WiFi
capability
If you have activated the electronic start
timer, the symbol lights up on the dis-
play.
→ "Setting timer programming", Page 24
If the water inflow or drainage malfunc-
tions, the symbol lights up or flashes on
the display.
1 Wi-Fi is a registered trademark of the Wi-Fi Alliance.
1
Depending on the appliance specifications
1
button
1
", Page 26
1 .
The display shows information about the remaining running
time or the basic settings. You can change the basic settings
via the display and the setting buttons.
→ "Changing basic settings", Page 26
"Setting timer programming" → Page 24
"Changing basic settings" → Page 26
Programmes
→ "Overview of programmes", Page 15
Additional functions
→ "Additional functions", Page 16
"Starting the programme" → Page 24
Display for water supply
Open the appliance door.
Water softening system
→ "Adding special salt", Page 20
Rinse aid system
→ "Adding rinse aid", Page 20
If you press for approx. 3 seconds, you can open
the basic settings.
→ "Changing basic settings", Page 26
14