2.12
ELECTRIC CONNECTIONS
The connection to AC power must be done
by experienced people and according with
existing laws. The installer is responsible of
the correct connection according with safety
rules. To make the connection, you have to
connect an electric cable to the terminal
board placed in the rear side of the cooker.
Must be done the correct connections of
RA without oven
Picture 15 - Position of the terminal board for the connection to the network
Picture 16 - Terminal board for the connection to the network: 1. Line 2. Neutral 3. Earth
1
2
3
72
line, neutral and earth as described in the
picture.
The cable and every other electric device
added must be dimensioned for the electric
load to sustain and must not be in contact
with points 50° C hotter than ambient tem-
perature.
RA with oven