Rizzoli RA Série Manuel D'utilisation page 82

3.13 BAKING-PAN HOLDER
The baking-pan holder allows to extract the
baking-pan in a safe way, with no need to
use rags or hot pads. The baking-pan holder
Picture 26 - Baking-pan holder.
3.14 PLATE COVER (OPTIONAL)
On every cooker it is possible to use a stain-
less steel plate cover, made to cover the
plate in the periods in which the cooker is
not used. In this way you obtain an uniform
desktop. The plate cover must be used with
3.15 WATER BASIN (OPTIONAL)
In RA 100 model, it is possible to request a
steel water basin to produce hot water for
domestic use. The basin is inserted in the up-
per part of the cooker, on the plate, in corre-
spondence of the fumes outlet. During the
use, be sure that the water is always present
4.1 CLEANING
The cooker works better if all its parts are
without combustion residuals, a clean cook-
er will be less exposed to problems due to
wear. Cleaning frequency depends on how
must be hooked to the baking-pan edge
and used with two hands.
cold cooker. Before placing it, be sure that is
not present humidity, that the plate is clean
and that all the necessary maintenance is
done.
in the basin, otherwise it could be damaged.
The basin must not be completely full, leave
at least 4 cm between the water level and
the cover.
4. MAINTENANCE
much and how the cooker is used, as well as
on combustible quality.
80