Publicité
Fahrenheit / Celcius
To change temperature units:
1.
Press and hold the light key for 3 seconds to
open the settings menu.
2. Use the + and - keys on the left to select the
Temperature Units function (unt).
3. Use the + and - keys on the right to select F or
C.
4. Press and hold the light key for 3 seconds to
conirm changes.
Energy Savings Mode
To set whether the oven automatically turns of
after twelve hours:
1.
Press and hold the light key for 3 seconds to
open the settings menu.
2. Use the + and - keys on the left to select the
Energy Savings function (E S).
3. Use the + and - keys on the right to select on or
oFF.
4. Press and hold the light key for 3 seconds to
conirm changes.
Calibrating Oven Temperature – User
Programmed Offset (UPO)
The oven is calibrated at the factory for accurate
temperatures, but if you feel the temperature is not
right in your kitchen, you can adjust it:
1.
Press and hold the light key for 3 seconds to
open the settings menu.
2. Use the + and - keys on the left to select the
User Programmed Ofset function (uPo).
3. Use the + and - keys on the right to select how
many degrees to adjust the temperature (nega-
tive values are valid).
4. Press and hold the light key for 3 seconds to
conirm changes.
BEFORE SETTING OVEN CONTROLS
Food Probe Enable/Disable
You can select whether the food probe is enabled
or disabled and whether the oven turns of when
the probe detects the speciied temperature.
To change the food probe settings:
1.
Press and hold the light key for 3 seconds to
open the settings menu.
2. Use the + and - keys on the left to select the
Food Probe function (FP).
3. Use the + and - keys on the right to select on or
oFF.
4. Use the + and - keys on the left to select the
End of Cycle function (EoC).
5. Use the + and - keys on the right to select on or
oFF.
6. Press and hold the light key for 3 seconds to
conirm changes.
Factory Reset
You can return all modiied settings to their original
factor settings.
To reset to factory settings:
1.
Press and hold the light key for 3 seconds to
open the settings menu.
2. Use the + and - keys on the left to select the
Reset function (rSt).
3. Use the + and - keys on the right to select YES
or oFF.
4. Press and hold the light key for 3 seconds to
conirm changes.
23
Publicité
