SilverCrest SSMT 600 A1 Mode D'emploi page 23

Safety information
RISK OF ELECTRIC SHOCK
Connect the appliance only to mains power sockets supplying
►
a mains power voltage of 220 – 240 V ∼, 50 - 60 Hz .
Remove the plug from the mains power socket in the event of
►
operating malfunctions and before you clean the appliance .
Do not expose the appliance to moisture and do not use it
►
outdoors .
If any liquid gets into the housing, disconnect the appliance
►
from the mains power socket immediately and have it re-
paired by a qualified technician .
Always pull on the plug to disconnect the appliance from the
►
mains; never pull on the power cable itself .
Do not kink or crush the power cable, and route the cable
►
so that it cannot be stepped on or tripped over .
Arrange for defective power plugs and/or cables to be
►
replaced as soon as possible by a qualified technician or by
our Customer Service Department to avoid the risk of injury .
This appliance may be used by persons with limited physical,
►
sensory or mental capabilities or lack of experience and
knowledge, provided that they are under supervision or
have been told how to use the appliance safely and are
aware of the potential risks .
The appliance and its connecting cable must be kept away
►
from children .
Do not attempt to open the hand blender's motor casing .
►
This can lead to hazards and also invalidates the warranty .
Never immerse the motor unit of the blender in liquids
or allow liquids to get into the motor unit housing .
■ 20 │ GB │ IE
SSMT 600 A1