Enraf Nonius Endomed 482 Mode D'emploi page 44

Select
• Alternation sequence (only with
• Ramp up time:
Select
• Hold time:
Select
• Ramp down time:
Select
• Surge program (only with
• Ramp up time:
Select
• Hold time:
Select
• Ramp down time:
Select
• Interval time:
Select
• Delay time (only available with linked channels):
Push button [13] and select channel 2 with the central controller [16].
Select
• Polarity (only with
Select
• Select the desired channel with button [13] and the central controller [16]. Adjust the voltage intensity
with controller [17];
• Push button [14] to start the therapy in case a surge program was selected.
5.2.2.7 Diadynamic currents
• Push button [7] to select
channels;
• Push button [8], select
• Select MF, DF, LP, CP or CPid with the central controller [16] and press button [14] to accept;
• Treatment time:
Select
• Surge program (only with MF and DF):
• Ramp up time:
Select
• Hold time:
Select
• Ramp down time:
Select
• Interval time:
Select
• Delay time (only available with linked channels):
Push button [13] and select channel 2 with the central controller [16].
Select
• Select CC or CV with button [13] and the central controller [16];
• Polarity:
Select
• Select the desired channel with button [13] and the central controller [16]. Adjust the current intensity
with controller [17];
• Push button [14] to start the therapy in case a surge program was selected.
5.2.2.8 Medium frequency interrupted direct current
• Push button [7] to select
channels;
• Push button [8], select
• Treatment time:
Select
• Select the desired channel with button [13] and the central controller [16]. Adjust the current intensity
with controller [17];
GB
10
with button [12] and adjust its value with the central controller [16];
with button [12] and adjust its value with the central controller [16];
with button [12] and adjust its value with the central controller [16];
with button [12] and adjust its value with the central controller [16];
selected):
with button [12] and adjust its value with the central controller [16];
with button [12] and adjust its value with the central controller [16];
with button [12] and adjust its value with the central controller [16];
with button [12] and adjust its value with the central controller [16];
with button [12] and adjust its value with the central controller [16];
selected):
or with button [13] and the central controller [16];
. Use the central controller [16] to select the desired channel or to link the
with the central controller [16] and press button [14] to accept;
with button [12] and adjust its value with the central controller [16];
with button [12] and adjust its value with the central controller [16];
with button [12] and adjust its value with the central controller [16];
with button [12] and adjust its value with the central controller [16];
with button [12] and adjust its value with the central controller [16];
with button [12] and adjust its value with the central controller [16];
or with button [13] and the central controller [16];
. Use the central controller [16] to select the desired channel or to link the
with the central controller [16] and press button [14] to accept;
with button [12] and adjust its value with the central controller [16];
selected):