Zippie VOYAGE Manuel D'utilisation page 21

VIII. SET–UP & USE
K. CANOPY INSTALLATION AND ADJUSTMENT
WARNING
It is always best to make sure the dependent is not seated in the mobility device during the
installation of accessories.
24
Canopy installation:
1. From behind your mobility device, attach the canopy to the seating shell
receivers (A).
2. Check that the canopy has been installed correctly by visual inspection and checking
for looseness, or an incorrect attachment. The plastic tabs (B) must be locked into
place for safe operation.
26
Canopy adjustment:
1. Once installed, you can adjust the canopy angle by pushing it forward or backward
until desired protection is obtained.
2. You can also loosen the button-head screws (C) and rotate the Canopy Brackets (D)
for more clearance or coverage for the occupant. Make sure to adjust both sides
evenly when adjusting the rotating canopy brackets.
3. Lift the front of the canopy all the way up for clearance and access to the child.
4. When canopy is being used with the tilt and recline adjustments, it may be necessary
to angle the canopy either forward or rearward for better clearance with the push
handle.
L. TELESCOPING STROLLER HANDLE EXTENSION
To adjust the Handle:
The handle height is adjustable for pushing comfort.
1. The adjustment is made from the back of the device. Depress both stroller handle
pivot buttons (E) simultaneously, and adjust to desired angle.
2. Release the buttons and allow the stroller handle to lock into place.
25
27
21
EN G L I SH
B
D
E
MK-100301 Rev.L
24
A
25
26
C
27