illy FAS 400T Manuel D'utilisation page 56

54
9.2.1
INTERFACE: Identifies an interface in terms of graphics (colours, layout, button style, etc.), operation
(category/selections, alphanumeric keypad, icon selection, sequence of screens to reach product selection).
After setting the correct interface code in the ID parameters,
The update can be performed remotely
which case the interface file must be pre-loaded on to the tablet using a USB pen drive.
Remote upgrade is completely automatic: the tablet connects to the specific server, downloads and installs
E
the file and then runs the interface.
N
The interface file is a compressed file (.zip extension) the name of which is formed from any alphanumeric
G
sequence of up to 20 characters (e.g. INTERFACE00000003.zip). To load this file up to the tablet after copying
L
it to a USB pen drive, proceed as follows:
I
Insert the pen drive in the USB port marked with label "USB- All applications"
S
H
select the "copy from USB" icon
the USB key that will be automatically copied to the tablet. After copying, the interface will be updated by
selecting the "locally" icon
UPDATE INTERFACE TYPE
; a dialogue window open allowing you to select the desired file from
.
illycaffè S.p.A. - Via Flavia 110 - 34147 Trieste - Italy -
use this icon to update the interface type.
(if the tablet is connected to the internet) or locally
www.illy.com
FAS 400T MPS.M - ISSUE 01
; in