illy FAS 400T Manuel D'utilisation page 28

26
STIRRER DISPENSER
Shift the movable guide "A" by removing the screws that secure it to adapt it to the length of the stirrers.
Remove the weight from the stirrer dispenser and load the stirrers into the c-shaped holder making sure
that they are all laying flat and in a horizontal position. Make sure that there are no defective stirrers or
stirrers with burrs. Once the stirrers have been loaded replace the weight on top of them.
To adjust the outlet to suit the thickness of the stirrers, remove the cover by pressing lever "B" indicated by
the arrow, loosen screw "C" and rotate lever "D" until you obtain the optimal position.
E
N
G
L
I
S
H
illycaffè S.p.A. - Via Flavia 110 - 34147 Trieste - Italy -
FAS 400T MPS.M - ISSUE 01
www.illy.com