illy FAS 400T Manuel D'utilisation page 13

FAS 400T MPS.M - ISSUE 01
UNPACKING
Remember to remove packing materials or equipment inside the vending machine
which could affect the correct function of the machine.
The packing material must be removed carefully to avoid damaging the machine. Inspect inside and outside
the cabinet for any damage. Do not destroy the packing materials until the carrier's representative has
examined them.
•
Screw the support feet into their housings on the bottom of the machine. Adjust them with a leveller so
that the machine is perfectly horizontal.
•
Open the machine door and remove the inside transport reinforcements. These parts are marked by
specific signs inside the machine.
•
Before connecting the machine to the power supply make sure that data on the plate correspond
to those of the electric and the water supply networks.
•
Do not cover with clothes or similar.
THE MANUFACTURER DISCLAIMS ALL RESPONSIBILITY FOR ANY DAMAGES
CAUSED BY THE NON-COMPLIANCE WITH THE CAUTIONS DESCRIBED IN THIS
SECTION.
illycaffè S.p.A. - Via Flavia 110 - 34147 Trieste - Italy - www.illy.com
11
E
N
G
L
I
S
H