illy FAS 400T Manuel D'utilisation page 54

52
If the command is set DEX UCS, the machine communicates with the outside world with the DEX-UCS
protocol.
Connection port: the machine offers the choice of the type of connection: Infrared interface (IRDA OUTPUT)
or cable interface on the 9-pin connector (RS232 OUTPUT).
Transmission speed: you are offered the choice of transmission speed, which must be consistent with the
setting of the 082925 board in the case of infra-red connection (see related instructions). The selection is made
by scrolling through the various speed options from the drop-down menu
Peripheral address: the machine prompts you to enter the address of the peripheral: enter the desired value
Negotiated speed: enables the possibility of speed negotiation between the machine and the terminal (option
valid only for cable connection)
Asset number and serial number: numerical machine identification codes that will be shown in the audit files
E
too.
N
G
L
I
S
H
illycaffè S.p.A. - Via Flavia 110 - 34147 Trieste - Italy -
FAS 400T MPS.M - ISSUE 01
www.illy.com