Horizon Hobby E-FLITE Turbo Timber SWS 2.0m EFL71750 Manuel D'utilisation page 23

Control Surface Direction ARF/BNF Basic
Switch on the transmitter and connect the battery. Use the transmitter to operate
the aileron, elevator, rudder and flap controls. View the aircraft from the rear when
checking the control directions.
Elevator
1. Pull the elevator stick back. The elevators should move up, which will cause the
aircraft to pitch up.
2. Push the elevator stick forward. The elevators should move down, which will
cause the aircraft to pitch down.
Ailerons
1. Move the aileron stick to the left. The left aileron should move up and the right
aileron down, which will cause the aircraft to bank left.
2. Move the aileron stick to the right. The right aileron should move up and the left
aileron down, which will cause the aircraft to bank right.
Rudder
1. Move the rudder stick to the left. The rudder should move to the left, which will
cause the aircraft to yaw left.
2. Move the rudder stick to the right. The rudder should move to the right, which
will cause the aircraft to yaw right.
Transmitter Command Control Surface Response
EN
23