Horizon Hobby E-FLITE Turbo Timber SWS 2.0m EFL71750 Manuel D'utilisation page 19

Wing Installation ARF/BNF Basic
1. Slide the wing tube into the socket in a wing panel.
2. Slide the other wing panel on the tube. The panels will fit tightly together.
3. Connect the servo connectors from the receiver to the servos in the wings.
4. Connect the connectors for the lighting from the wing.
5. Align the wing with the wing saddle on the fuselage and insert the wing pins
in the leading edge of the wing with the hole at the front of the wing saddle.
Ensure the wiring remains fully inside the fuselage and does not get pinched
between the wing and the wing saddle.
6. Secure the wing in place with the M6 x 30mm nylon screws, use a slotted
screwdriver to secure the wing screws.
EN
19