Horizon Hobby E-FLITE Turbo Timber SWS 2.0m EFL71750 Manuel D'utilisation page 15

Additional Motor Cooling (Optional) ARF/BNF Basic
When flying in higher temperature environments, it may be necessary to provide
additional cooling for the motor.
1. Use a rotary tool with a sanding drum to remove the area indicated by the
decals on the bottom of the cowling.
2. Apply low-tack tape to the black area of the cowling. Use a felt-tipped pen to
make a line 25mm back from the front edge of the cowling.
3. Position the intake on top of the cowling. Center the intake and align the front
edge with the line made previously.
4. Use a felt-tipped pen to transfer the outline onto the tape.
EN
15