Corghi EM 9250 CompactLine Manuel D'utilisation page 90

- Read the internal distance d1 from the body on the rule.
- Modify the value on the right display by pressing the
previously read distance d1.
- Press the
to the outer side (the distance LED lights up on the panel).
- Position the end of the measuring arm on the plane chosen for the application of the
outer weight, as previously described for the inner side.
- Read the distance d2 from the body on the rule.
- Modify the value on the right display by pressing the
previously measured distance d2.
- Press the
- Read the rated rim diameter value on the tyre.
- Modify the value displayed on the right display by pressing the
to get the previously measured nominal diameter.
- Press to display the unbalance values (recalculated according to the new dimensions)
or perform a wheel spin.
ALU 1P
90
key again to prepare the machine for entry of the d2 distance relating
key again to set the machine for entering the nominal wheel diameter.
14
EM 9250 CompactLine Operator's manual
keys to get the
keys to get the
keys
14a