Set Up - Rim Diameter Display Unit Of Measurement; Set Up - Rim Width Display Unit Of Measurement - Corghi EM 9250 CompactLine Manuel D'utilisation

- use the keys to search for OPt on (OPt oFF if disabled)
- press the
OPt on to activate the display of the alarm indicator light
or OPt oFF to deactivate the display of the alarm indicator light
- press the
15.7. SET UP - RIM DIAMETER DISPLAY
UNIT OF MEASUREMENT
The machine may be set to display the rim diameter unit of measurement in inches or
millimetres.
Proceed as follows to modify this configuration:
- press the
- use the
- press the
- use the
is enabled)
- press the
-d- MM to activate the display in millimetres
or -d- in to activate the display in inches
- press the
15.8. SET UP - RIM WIDTH DISPLAY UNIT
The machine may be set to display the rim width unit of measurement in inches or mil-
limetres.
Proceed as follows to modify this configuration:
108
key to change the setting:
key to confirm and exit.
key
keys to search for SEt UP
key to confirm
keys to search for -d- in (-d- MM if the display in millimetres
key to change the setting:
key to confirm and exit.
OF MEASUREMENT
EM 9250 CompactLine Operator's manual