ACCESSORIES INCLUDED WITH
- Code 219244 Rim pliers�
The locking grip, when fixed firmly to the rim edge prior to mounting, makes it easier
to lift the tyre, insert it into the rim well and keep it in position�
- Code 236906 Bead lifting lever�
The bead lifting lever keeps the bead in position on the tool when demounting agri-
culture wheels�
- Code 317620 side ring lever
The side ring lever is used to make it easier to remove the side rings from the earthmov-
ing wheels that use them�
- Code 435443 Grease gun
The grease gun is used for the monthly greasing recommended for all moving machine parts�
OPTIONAL ACCESSORIES SUPPLIED
Please refer to the relevant accessories catalogue�
SPECIFIED CONDITIONS OF USE
The tyre changer was designed exclusively for tyre mounting and demounting�
WARNING
Any use other than those described in this manual is to be considered improper and
unreasonable.
DANGER
The manufacturer does not intend the machine to be used for inflation operations.
If the operator decides to proceed with partial bead insertion in the tyre on the ma-
chine using his own equipment, a pressure of 0.5 bar must NOT be exceeded (unless
the tyre manufacturer does require lower pressure levels), as indicated in the UNI
Standard 10588.
WARNING
Do not clean or wash the wheels mounted on the machine with compressed air or
jets of water.
WARNING
Only original CORGHI equipment is recommended for use with the machine.
46
THE MACHINE
ON REQUEST
Operator's manual MONSTER AGTT