Pressing the
and the A STP message is displayed.
If the "RPA" (centred position) programme is active, at the end of each balancing spin the
machine stops the wheel in the position for application of the weight on the outer side; if it
is equal to zero, the wheel is stopped in the inner side weight application position.
By simultaneously pressing
position is activated.
This function is described at length in the AUTOMATIC POSITION SEARCH section.
• Manually applied adhesive weights
- Select the first side to be balanced.
- Turn the wheel until the central element of the corresponding position indicator lights
up.
- Apply the indicated balancing weight in the position of the rim corresponding to 12
o'clock.
WARNING
The application position of the adhesive weight can be changed from 12 o'clock to 6 o'clock
by following the instructions in the set up menu "Adhesive weight application position ".
WARNING
- for applying the adhesive weight in the MOTORCYCLE (ALU) programmes, always use
12 o'clock as the reference regardless of the setting in "SELECTION OF ADHESIVE
WEIGHT APPLICATION POSITION".
IMPORTANT
in ALU1 and ALU2 programmes the unbalance displayed by the machine on the outer side
refers to the adhesive weight centre of gravity at the swinging unit bearing flange, (Fig. 17)
• Manually applied adhesive
weights with laser device
enabled (if provided)
- Select the first side to be
balanced.
- Turn the wheel until the
central element of the cor-
responding position indica-
tor lights up together with
the laser line.
- Apply the indicated balanc-
ing weight in the position on
the rim corresponding to 6
EM 9250 CompactLine Operator's manual
key while the wheel is moving interrupts the wheel spin before time
and
, automatic search for the second side
UK
17
93