PULOX ABDM50 Manuel D'instruction page 74

EN
6.13 Sleep Time Setting
Awake and Asleep time can be set by manual mode, after setting, the
software will calculate the data again under "Awake" and "Asleep" state,
then update the trend graph and calculate the statistic data automati-
cally. The interface shown as below will appear after selecting "Sleep
Period" from menu.
Figure 6.13 Sleep Time Setting
6.14 BP Threshold Setting
The BP threshold can be changed by manual mode, after changing, the
corresponding trend graph and analysis data will be automatically re-
newed. Select "Threshold" to enter its sub-menu shown as below.
Figure 6.14 BP Threshold Setting
The default recommended thresholds for calculating Blood Pressure Load are
140/90 for wake periods and 120/80 for sleep periods. These are the default
values when you select the Factory Defaults button.
6.15 Histogram
Press the shortcut key , the following interface will appear.
74