PULOX ABDM50 Manuel D'instruction page 64

4.5 Maintenance and Cleaning
*Please do obey the precautions and correct operating methods in this user
manual. Otherwise, we will not responsible for any fault.
Warning
◼ Remove the batteries before cleaning the device or peripheral equip-
ment. The accessories and main unit must be separated for cleaning.
◼ Do not squeeze the rubber tube on the cuff.
Cleaning:
◼ Do not soak the device and accessories in liquid.
◼ If any damage or deterioration of the device and accessories is found,
please do not use it.
◼ Do not let water or cleaning agent flow into the sockets to avoid device
damage.
◼ Do not use gasoline, volatile oil, diluent, etc. to wipe the device.
Maintenance:
◼ Clean the device and accessories regularly. It is recommended to clean
them every one month. When it gets dirty, use a dry and soft cloth to wipe.
If the device, accessory or the peripheral equipment is very dirty, it is avail-
able to dip the soft cloth into water or mild detergent, and wring out, then
use the cloth for cleaning. Do not clean the inner parts.
◼ The device should be inspected and calibrated periodically or obey the re-
quirements of the hospital (the recommended period is 1 year). It is avail-
able to inspect in the state specified inspection institution or by profes-
sional personal. Please contact our company's after-sales personnel if you
need to enter the static pressure detection mode for inspection.
Reusable Blood Pressure Cuff
The cuff can be sterilized by means of conventional autoclaving, gas, or ra-
diation sterilization in hot air ovens or disinfected by immersion in decon-
tamination solutions, but remember to remove the rubber bag if you use
these methods. The cuff should not be dry-cleaned. It can be machine-
washed or hand-washed, the latter method may prolong the service life of
the cuff. Before washing, remove the latex rubber bag. Allow the cuff to dry
thoroughly after washing, then reinsert the rubber bag in the cuff.
Figure 5.1 Replace the rubber bag
64
EN