PULOX ABDM50 Manuel D'instruction page 67

EN
Hard Disk: 250G or more
Display: Resolution ratio 1024*768 or higher
USB: 2 or more
Resolution of printer: 600 DPI
Chapter6 Software Functions
6.1 User Register
Double-click the software icon, then the dialog box shown as below ap-
pears.
Figure 6.1.1 User Register
Enter the username, click "Okay", then the "Configuration Set" dialog
box shown as Figure 6.1.2 will appear. Click "Delete" to delete the con-
figuration information of the user. "Delete all" is used to delete the con-
figuration information of all users.
If you are a new user, then the following dialog box will appear.
Figure 6.1.2 Configuration Set
"Case path": select the default storage path for case, after getting the
data from the device, the case file will be saved in this path.
If you select "Always use default path", then the case file will be auto-
matically saved in the installation path.
6.2 Main Interface
The device will enter to the main interface (shown as below) after set-
ting the configuration information.
67