PULOX ABDM50 Manuel D'instruction page 56

Switch the "ABPM ON-OFF" to "BEGIN", then a prompt message for ABPM of
current user will pop up, such as:
Press -button, clear the ambulatory blood pressure measure data, enter
ambulatory blood pressure mode, and start the ambulatory blood pressure
monitoring. Refer to Figure 3.4.6 for the ABPM interface.
Press -button, save ambulatory blood pressure measure data, enter am-
bulatory blood pressure mode, and start the ambulatory blood pressure
monitoring. Ambulatory blood pressure measurement record includes previ-
ous data. Refer to Figure 3.4.6 for the ABPM interface.
Press -button, give up the choice, return the previous menu, and the am-
bulatory blood pressure monitoring is not turned on.
2．ABPM Working Interface
In ABPM working environment, backlight is only for 5 seconds, except the
, press any key to wake the backlight, ABPM working interface is as
shown:
If PROMPT SOUND occurs, press SILENCE key to stop it and press it again to
continue.
In ABPM working interface, long press
Figure 3.4.5 ABPM Prompt Menu
Figure 3.4.6 ABPM Working Interface
-button, the exit ABPM hint
56
EN