PULOX ABDM50 Manuel D'instruction page 57

interface will pop up. In this interface, press
environment, and enter the ordinary user working environment, the boot-
strap interface will be displayed. In the exit ABPM hint interface, press
button to exit the interface, and return the ABPM working interface.
In the ABPM working interface, to turn off the device, exit the ABPM mode
first, then long press the power switch to turn it off.
3．ABPM Data Review
Select "ABPM DATA" item in "ABPM" menu to enter the data review inter-
face.
⚫ "BIG FONT" display interface: Every record is an interface, and display con-
tents include: the current user, total of the current user record data, serial
number of the record, stored time of the record, high pressure, low pres-
sure, mean pressure, Pulse Rate.
⚫ In the ABPM "BIG FONT" data review interface, press
"LIST", the data table interface will pop up. Each interface contains 5 rec-
ords, every record includes time, high pressure, low pressure, mean pres-
sure, Pulse Rate.
⚫ In the ABPM "LIST" data review interface, press
"TREND", the data trend interface will pop up. Trend interface can trace
100 trend records, if measuring data are more than 100 items, press ,
buttons to glide trend curve for left and right, the scale of the vertical axis
and the starting point, end point automatically adjust according to the
width of the stored data. The date displayed at the bottom of trends are
the data recording time of the first point and last point respectively for
current trend.
3.4.6 PROMPT SOUND
After selecting "ON", the loudspeaker turns on. The symbol
in the main interface. After selecting "OFF", the loudspeaker turns off,
will appear. When you change the settings, the password input box will ap-
pear, enter the correct password "8015" to change. The inputting method of
password: move the cursor to the password display area, press the middle
button, when the rectangle frame turns to red selected state, adjust the
number by the "Up" and "Down" button, then press the middle button again
to exit the selected state after adjusting. After entering the 4-bit password,
move the cursor to "CONFIRM", then press the middle button, the prompt
sound setting can be changed if the password is correct.
-button to exit ABPM working
57
button to select
button to select
will display
EN
-