PULOX ABDM50 Manuel D'instruction page 47

number, etc.
This device has friendly operation interface, and adopts 2.4inch color LCD. It
integrates data review function and display function which includes BIG
FONT single record data review, data list, BP data trends chart, the current
time, date, power and so on.
User can power on/off the monitor, start manual measure, set system pa-
rameters and so on with five keys in the front panel. (Please refer to "Button
Functions" part for detail)
The monitor does not have an alarm system, but it will prompt when the
power is low, the measure is wrong, or the measure data exceeds the set
limits. When the power is low or the measure is wrong, the prompt is audible
and visual, the device will buzz intermittently and the red light will flash to
prompt the user to replace batteries or prompt the reason of the failed meas-
urement; when the measure data exceeds the set limits, the prompt is audi-
ble, the font color of measure results will change to red. Users can open and
close the prompt according to needs.
The cuff socket is located on the top of the device and the USB socket at the
bottom of the device. The stored data can be transferred to computer with
the USB interface, and then various operations can be performed by using
the PC software. (Please refer to "Software Functions" part for detailed con-
tents)
Note
In the common user mode, the monitor will periodically turn off backlight if
there is no operation, and automatically shuts down if there is no operation
for two minutes. When the backlight turns off in the ambulatory blood pres-
sure mode, the blue indicator intermittently flashes to prompt the device in
running state.
1.3 Button Functions
All the operations of the Blood Pressure Monitor could be completed with
the buttons. The names of button are on them. They are:
•
Press the button for a long time, then the system will start. When turning
on and off the monitor, the red light and the blue both flashes once to
prompt that the on or off operation is successful. Press it for a short time
to return the boot-strap interface.
•
The text in the middle bottom of the screen indicates the function of this
key. Whatever menus the system is in, press the button and the system
immediately executes a certain function.
•
The text in the left bottom of the screen indicates the function of this
key. Such as: The button is the prompt switch in the boot-strap interface,
up key in the "SYSTEM MENU", and left key in the "TREND" chart.
47
EN