Publicité
1 Brake hose
2 Master cylinder
3 "ENGINE STOP" button lead
4 "ENGINE STOP" button
5 Throttle cable
6 Clutch cable
7 Clamp
8 Cable guide
CABLE ROUTING DIAGRAM
A Install the brake hose so that its pipe portion
directs as shown and lightly touches the projec-
tion on the master cylinder.
B Pass the "ENGINE STOP" button lead in the
middle of the clutch holder.
C Clamp the "ENGINE STOP" button lead to the
handlebar.
D Pass the brake hose in front of the number
plate and through the cable guide.
E Pass the clutch cable through the cable guide
on the number plate.
2-17
SPEC
Publicité
