Publicité
Les langues disponibles
Les langues disponibles
13
Outdoor use
If the compressor is used outdoors, extension cables for
outdoor use with appropriate marking may only be used.
Caution: adequate cable cross-section (at least 1.5
mm) must be used; there may be problems with the
appliance starting when cables of more than 10 m
are used at unfavourable temperatures.
14
Attention
Work carefully and cautiously. Do not use the
compressor if you are tired. If the compressor cannot be
used under the influence of alcohol, drugs or
pharmaceuticals that may be the cause of tiredness.
15
Check the components for defects or untightness
If any protective equipment or other parts of the
compressor have been damaged, it is necessary to
check it before putting the appliance into operation again
and make sure that the operation will be reliable.
Check the direction adjustment of the moving parts,
lines, pressure control valve, compressed air
connections and all other construction elements
important for common operation of the compressor. Any
damaged parts must be repaired or replaced in a service
shop or as specified in the Operating Instructions.
Do not use the compressor if the pressure sensor is
defective.
1.
Use the compressor only for works mentioned in
these Operating Instructions
The compressor is an appliance producing compressed
air. Never use the compressor for works not mentioned
in these Operating Instructions.
2.
Appropriate use of the compressor
When operating the compressor, please follow all
instructions contained in this document. Do not let
children or persons not familiarised with the way the
appliance works use the compressor.
3.
Check whether all screws and covers are tightened
Check whether all screws and labels are mounted
properly. Check whether they are tightened at regular
intervals.
4.
Keep the ventilation louver clean
Keep the engine ventilation louver clean. Clean it at
regular intervals if the compressor is used in a heavily
polluted environment.
5.
Use the compressor under rated voltage
Use the compressor under the voltage specified on the
label with electric details. If the compressor is used at
voltage higher than the nominal value, the engine may
get overheated.
6.
Do not use the compressor if defective
If the compressor makes weird sounds or vibrates
heavily or seems to be defective in any other way when
being operated, it must be stopped immediately; have
the cause identified in the nearest customer service
centre
7.
Do not clean the plastic parts with solvents
Solvents such as petrol, thinners, diesel oil or other
substances containing alcohol may damage the plastic
parts of the compressor. Therefore, do not clean the
plastic parts with these substances but use soap suds
or appropriate liquids instead if necessary.
8.
Original spare parts to be used only
Claims arising from the warranty will not apply if spare
parts of other manufacturers are used. Using other
spare parts may lead to compressor malfunction. The
original spare parts can be obtained from our
authorised dealers.
9.
Do not make any change to the compressor
Do not make any change to the compressor. For any
repair, please contact our customer service centre. Any
unauthorised repair may negatively affect the
compressor power; however, it may also cause severe
injuries if executed by a person lacking adequate
technical knowledge.
10.
Do not touch the hot parts of the compressor
Do not touch the lines, engine and other hot parts of the
compressor as you could face a risk of burn.
Emergency Action
Apply the first aid adequate to the injury and get qualified
2
medical assistance as quickly as possible. Protect the injured
person from more accidents and calm him/her down.
For the sake of eventual accident, in accordance with DIN
13164, a workplace has to be fitted with a first-aid kit. It is
essential to replace any used material in the first-aid kit
immediately after it has been used. If you seek help, state
the following pieces of information:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Disposal
Disposal instructions are illustrated in the form of pictograms
on the device or packaging. Description of the pictograms is
given in "Identification" chapter.
Disposal of transport packaging
Packaging protects the device against damage during
transport. Packaging materials are usually selected according
to their effect on environment and disposal methods and can
therefore be recycled.
Returning of the packaging back to circulation saves
resources and costs for packaging disposal.
Parts of the packaging (e.g. foil, styropor) may be dangerous
for children. Risk of suffocation!
Keep these parts of the packaging out of reach of children
and dispose as soon as possible.
Operator requirements
The operator must carefully read the Operating Instructions
before using the appliance.
Qualification
No special qualification is necessary for using the appliance
apart from detailed instruction by an expert.
Minimum age
The appliance can only be operated by persons over 18 years
of age. An exception includes youngsters operating the
appliance within their professional education to achieve
necessary skills under trainer's supervision.
Technical specifications
Connection:
Engine power:
Air jet capacity:
Suction power:
Effective volume delivered:
Cylinders:
Revolutions:
Max. pressure:
Weight:
Transport and storing
The appliances are mobile and can practically be used
everywhere. If the compressor is wall-mounted, the minimum
distance of 30 cm must be kept to ensure appropriate cooling.
Appliances must necessarily be transported in a vertical
position; otherwise, oil will run out of the air hole of the engine
case. Prevent any hits to fittings.
14
230 V~50 Hz
1,800 W/P1
24 l
265 l per minute
179 l per minute
1
2,800 revs per minute
10 bar
21 kg
Publicité
