Instructions For Use In Explosion-Protected Area (Ex Area); Safety Instructions - Burkert 2301 Manuel D'utilisation

Basic Safety Instructions
3.1. instructions for use in explosion-
protected area (eX area)
3.2. safety instructions
For use in EX area zone (gas) 1 and 2,
zone (dust) 21 and 22, applies:
Danger!
danger of explosion caused by electrostatic charge!
If there is a sudden discharge from electrostatically charged devices
or persons, there is a danger of explosion in the EX area.
• Take appropriate measures to prevent electrostatic charges in the
EX area.
• Clean the device surface by gently wiping it with a damp or
antistatic cloth.
Type 2301
3.2.1. Media in the eX area
If explosive media are used, this may create an additional
risk of explosion!
3.2.2. control unit in the eX area
The control unit may restrict use in an explosive atmosphere.
Follow operating instructions for control unit.
3.2.3. cleaning in the eX area
Test cleaning agent for approval in explosive atmosphere.
3.2.4. adhesive Label for eX area
ii 2g c t4 ip65/67
ii 2d c t135°c
Fig. 1: Label EX area
english
Warnung: In EX-Bereichen darf die Oberfläche
achtung: in ex-Bereichen darf die Oberfläche
nur mit einem feuchten tuch gereinigt werden nur mit einem feuchten Tuch gereinigt werden
Warning: In Hazardous Areas the surface
c autiOn: in hazardous areas the surface
may only be cleaned with a wet towel may only be cleaned with a wet towel
7