Designated Application Area - Burkert 2301 Manuel D'utilisation

5.3.1. Options
• Control unit
Depending on the requirement, control units in various designs are
available.
• Positioner Type 8692, 8694 and 8696
• Process controller Type 8693
5.3.2. device versions
actuator sizes
Depending on the orifice, the globe control valve is available for the
following actuator sizes:
Orifice dn available actuator size ø [mm]
4 - 15 50
20 50
25 50
32
40 -
50
Fig. 3: Actuator sizes
pilot pressure
Designs with lower pilot pressure (reduced spring force) are
available on request.
Contact your Bürkert sales office or our Sales Centre.
E-mail: info@de.buerkert.com
10
70
70 -
70 -
90
90
90 130
english
Type 2301
Product description
5.4. designated application area
Observe the maximum pressure range according to the
type label!
• Neutral gases and liquids up to 16 bar.
• Steam up to 11 bar absolute / 185 °C for seat seal steel / steel.
Steam up to 2.7 bar absolute / 130 °C for seat seal PTFE / steel.
• Aggressive media.
Follow instructions for use in the EX area!
See chapter "3.1".
5.4.1. application areas
e.g. Plant construction
Food processing
Chemical engineering
Sterilizer construction, temperature control
Gas dosing
Conveyor systems for various bulk material (also sensitive
foodstuff)