Authorized Use; Predictable Misuse; Basic Safety Instructions - Burkert 0293 Manuel D'utilisation

Electrovanne 2/2 voies
Masquer les pouces Voir aussi pour 0293:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.

auThOrized use

Incorrect use of the solenoid valve Type 0293 can
be dangerous to people, nearby equipment and the
environment.
• The device is designed for dosing, blocking, filling and
aerating media.
• The device is classified in accordance with DIN EN 161
Group 2, Class A for gas.
• Use according to the permitted data, operating conditions
and conditions of use specified in the contract documents
and operating instructions. These are described in the
chapter entitled "Technical Data".
• The device may be used only in conjunction with third-
party devices and components recommended and
authorised by Bürkert.
• Correct transportation, correct storage and installation
and careful use and maintenance are essential for reliable
and problem-free operation.
• Use the device only as intended.
english
4
4.
basic safeTy
insTrucTiOns
These safety instructions do not make allowance for any:
• Contingencies and events which may arise during the instal-
lation, operation and maintenance of the devices.
• Local safety regulations – the operator is responsible for
observing these regulations, also with reference to the
installation personnel.
Danger!
Danger – high pressure!
• Before loosening the lines and valves, turn off the pres-
sure and vent the lines.
Risk of electric shock!
• Before reaching into the device, switch off the power
supply and secure to prevent reactivation!
• Observe applicable accident prevention and safety
regulations for electrical equipment!
Risk of burns/Risk of fire if used continuously through
hot device surface!
• Keep the device away from highly flammable substances
and media and do not touch with bare hands.
english
6

3.1. predictable misuse

• Do not physically stress the device (e.g. by placing objects
on it, using it as a screwing aid, standing on it or using it
as a lever arm).
• Do not make any external modifications to the device
housings. Do not paint the housing parts or screws.
Caution!
Risk of injury due to malfunction of valves with alter-
nating current (AC).
Sticking core causes coil to overheat, resulting in a
malfunction.
• Monitor process to ensure function is in perfect working
order!
General hazardous situations.
To prevent injury, ensure that:
• The system cannot be activated unintentionally.
• Installation and repair work may be carried out by autho-
rized technicians only and with the appropriate tools.
• After an interruption in the power supply or pneumatic
supply, ensure that the process is restarted in a defined
or controlled manner.
• The device may be operated only when in perfect condi-
tion and in consideration of the operating instructions.
• The general rules of technology apply to application plan-
ning and operation of the device.
Type 0293
english
5
english
7

Publicité

Table des Matières
loading

Table des Matières