General Safety Instructions; General Description; Construction Of The Valve - Burkert 6227 Manuel D'utilisation

1

GENERAL SAFETY INSTRUCTIONS

To ensure that the device functions correctly, and will have a long service life,
please comply with the information in these Operating Instructions, as well as
the application conditions and additional data given in the Type 6227 data sheet:
• When planning the application of the device, and during its operation,
observe the general technical rules!
• Work on the device should only be carried out by specialist staff using
suitable tools!
• Please note: Piping or valves should not be removed from a system which is
under pressure!
• Always switch off the voltage supply before working on the system!
• Take suitable measures to prevent unintentional operation or impermissible
impairment.
• If these instructions are ignored, or if inadmissible work is carried out on the
device, no liability will be accepted from our side, and the guarantee on the
device and accessory parts will become invalid!
ATTENTION!
2

GENERAL DESCRIPTION

2.1

Construction of the valve

Modular, combinable valve system of 2/2-way solenoid valves, which work as
pilot-controlled diaphragm seat valves.
Available in nominal widths:
Operation:
2 - 6227
Danger of injury!
The surface of the solenoid valve can become very hot
during continuous operation.
DN10 and DN13
WWA, i.e. closed when off