Intended Use; Basic Safety Instruction - Burkert 6126 Manuel D'utilisation

2

INTENDED USE

Non-intended use of the solenoid valves Type 6126 and Type
6606 can be dangerous to people, nearby equipment and the
environment.
▶ The solenoid valves Type 6126 and Type 6606 are designed for
use in analytical, medical and laboratory technology. They can
be used primarily for the metering, filling, mixing and distribution
of small amounts.
▶ Do not use the device outdoors.
▶ Use according to the authorized data, operating conditions
and conditions of use specified in the contract documents and
operating instructions. These are described in the chapter enti-
tled ""6 Technical Data"".
▶ The device may be used only in conjunction with third-party
devices and components recommended and authorized by
Bürkert.
▶ Correct transportation, correct storage and installation and
careful use and maintenance are essential for
reliable and faultless operation.
▶ Use the device only as intended.
3

BASIC SAFETY INSTRUCTION

These safety instructions do not make allowance for any contin-
gencies and events which may arise during the installation, oper-
ation and maintenance of the devices.
DANGER!
Danger – high pressure!
▶ Before loosening the lines and valves, turn off the pressure and
vent the lines.
Risk of electric shock!
▶ Before reaching into the device or the equipment, switch off
the power supply and secure to prevent reactivation!
▶ Observe applicable accident prevention and safety regulations
for electrical equipment!
Risk of burns/risk of fire if used continuously through hot
device surface!
▶ Keep the device away from highly flammable substances and
media and do not touch with bare hands.
english
3