General Safety Instructions; Symbols Used - Burkert 6518 Instructions De Service

1

GENERAL SAFETY INSTRUCTIONS

To ensure that the device will function correctly, and have a long service life,
please comply with the information in these Operating Instructions, as well as with
the application conditions and additional data given in the Type 6518 and 6519
data sheet:
•
When planning the application of the device, and during its operation, observe the
general technical rules!
•
Observe the relevant accident prevention and safety regulations applicable for
electrical equipment throughout the operation, maintenance and repair of the device;
always switch off the voltage supply before working on the system!
•
Note that lines and valves must not be unscrewed from systems that are under
pressure!
•
Take suitable measures to prevent unintentional operation or impermissible
impairment!
•
If these instructions are ignored, no liability will be accepted from our side, and the
guarantee on the device and on accessories will become invalid!
NOTE
2

SYMBOLS USED

In these Operating Instructions, the following symbols are used:
indicates a working step that you will have to carry out
ATTENTION!
NOTE
12
Approvals such as Ex, UL, UR, CSA, DVGW etc., will be
indicated on the rating plate, or by a special label.
indicates information which must be followed. Failure to do this
could endanger your health or the functionality of the device
indicates important additional information, tips and
recommendations
Type 6518/6519 and type MP07