Intended Use
2.
inTended use
non-intended use of the globe control valve type 2301
may be a hazard to people, nearby equipment and the
environment.
• The device is designed for the controlled flow of liquid and
gaseous media. Operation is possible only in combination with a
suitable control unit.
• The admissible data, the operating conditions and conditions of
use specified in the contract documents, operating instructions
and on the type label are to be observed during use. The desig-
nated application cases are specified in the chapter entitled
"5. Product description".
• The device may be used only in conjunction with third-party
devices and components recommended and authorised by
Bürkert.
• Correct transportation, correct storage and installation and
careful use and maintenance are essential for reliable and fault-
less operation.
• Use the device only as intended.
Type 2301
2.1.
restrictions
If exporting the system/device, observe any existing restrictions.
2.2.
predictable Misuse
• Supply the media connections only with those media which are
specified as flow media in the chapter entitled "7. Technical Data".
• Do not put any loads on the valve (e.g. by placing objects on it or
standing on it).
• Do not make any external modifications to the valves. Do not paint
the body parts or screws.
• The actuator body must not be opened. If opened, there is a risk of
injury from the tensioned spring inside.
english
5