Publicité
Les langues disponibles
Les langues disponibles
7.6. MOUNTING THE WHEEL
EXPLOSION HAZARD. Always check that the tyre/rim combination is correct in terms
of compatibility (tubeless tyre on tubeless rim, tube type tyre on tube type rim) and
geometrical size (keying diameter, cross-section width, Off-Set and shoulder profile)
before mounting.
AVOID PERSONAL INJURY OR DEATH.
Also check that rims are not deformed, that their fixing holes have not become oval, that
they are not encrusted or rusty and that they do not have sharp burrs on the valve holes.
Check that the tyre is in good condition with no signs of damage.
- Before you start with tyre mounting operations,
lubricate the beads (fig.26).
- Check that the tyre is in good condition with no signs
of damage.
- Place the tyre over the wheel and press pedal
to tilt the tower forward.
- Position the bottom bead (fig.27) beneath the right
hand side of the mount/demount head.
Press the turntable control pedal
table clockwise and mount the bead. Use the drop
centre by pressing the sidewall opposite the head
to reduce tensional force on the bead as the wheel
rotates (fig.27).
- Once you have mounted the bottom bead, repeat
the same steps for the upper bead (fig.28).
AS 944 TI User Manual
DANGER
to turn the
- Press pedal
release the wheel and remove it from the tyre
changer.
28
to tilt the column backwards,
26
27
35
Publicité
