Publicité
Les langues disponibles
Les langues disponibles
8 Tower (5) tilt pedal (2-position pedal to operate tower tilt).
9 Clamp (6) control pedal (3-position pedal for opening and closing rim clamps).
10 Bead breaker pedal (2-position pedal to operate the bead breaker (13).
11 Table top (7) pedal (3-position pedal)
position 0: table top stationary
depressed (held with foot): clockwise rotation at speed proportional to pedal pressure.
raised (held with foot): single speed counter-clockwise rotation.
12 Inflation pedal.
13 Bead breaker shoe (mobile shoe to detach bead from rim).
14 Valve release button (button for manual release of excess air from tyre).
15 Pressure gauge (for tyre pressure readings).
16 Rim support (the rim support retracts to aid bead breaking on Racing wheels).
17 Safety relief valve (max. pressure 11 bar) + Pressure gauge.
18 Filter/lubricator and pressure regulator (regulates pressure, removes water, lubricates
and filters the compressed air supply).
19 Lube tank support.
20 Bead lifting tool (raises and positions the tyre bead on the mount/demount head).
21 Doyfe inflator chuck (clips on to the tyre valve for inflation).
22 Inflation nozzles (air blast from nozzles expands tyre sidewalls to seal beads and
allow inflation).
23 Air tank.
24 Blade protection.
25 Bead breaker aperture regulation screw.
6. OPTIONAL ACCESSORIES
For a complete list of optional accessories supplied on request, see the document
"ORIGINAL ACCESSORIES FOR TIRE CHANGER"
7. BASIC PROCEDURES - USE
AVOID PERSONAL INJURY
Before working on the machine:
- disconnect the power supply plug
(Fig. 12a);
- isolate the compressed air line by
disconnecting the shutoff valve
(quick-release connector) (Fig. 12b).
AS 944 TI User Manual
WARNING
12a
12b
27
Publicité
