Mondolfo Ferro AS944TI Manuel D'utilisation page 18

1.3. SPECIAL RIM/TYRE CONSIDERATIONS
Wheels equipped with low tyre pressure sensors or special tyre and rim designs may require
special procedures. Consult wheels and tyre manufacturers' service manuals.
1.4. INTENDED USE OF THE MACHINE
This machine must be used only to remove and replace an automotive tyre on an automo-
tive rim, using the tools with which it is equipped. Any other use is improper and can result
in an accident.
The machine can not work on motorcycle wheels.
1.5. EMPLOYEE TRAINING
1. The employer is obligated to provide a programme to train all employees who service rim
wheels in the hazards involved in servicing those rim wheels and the safety procedures to be
followed. Service or servicing means the mounting and demounting of rim wheels, and related
activities such as inflating, deflating, installing, removing and handling.
has been trained and instructed in correct procedures of servicing the type of wheel being
serviced, and in safe operating procedures.
information contained in this manual.
2. The employer shall ensure that each employee demonstrates and maintains the ability to
service rim wheels safely, including performance of the following tasks:
during inspection of the rim wheel following inflation, never leaning over.
3. The employer shall evaluate each employee's ability to perform these tasks and to service
rim wheels safely, and shall provide additional training as necessary to assure that each em-
ployee maintains his or her proficiency.
1.6. PRE-USE CHECKS
Before beginning work, carefully check that all components of the machine, especially rub-
ber or plastic parts, are in place, in good condition and working properly. If the inspection
18
NOTICE
AS 944 TI User Manual