Publicité
Les langues disponibles
Les langues disponibles
The machine is equipped with an inflation system independent of all the other functions
described above. Take great care when using it (read the INFLATION chapter).
Each machine has a data plate Fig. 8, with information about the machine and some
technical data.
As well as the manufacturer's details, the plate indicates:
Mod. - Machine model;
V - power supply voltage in Volts;
A - Input voltage in Amperes;
kW - Absorbed power in kW;
Hz - Frequency in Hz;
Ph - Number of phases;
bar - Operating pressure in bar;
Serial No. - Machine serial number;
ISO 9001 - Certification of the company's
Quality System;
EC - EC marking.
5.1 OPERATOR POSITION
Figure 9 shows the operator's positions during
the various work phases:
A
Bead breaking
B
Tyre demounting and mounting
C
Inflation area.
In these conditions, the operator can carry out, monitor and check the outcome of all
tyre change operations and take action in the case of any unforeseen events.
RISK OF CRUSH INJURY. Column tilting must be performed from work position B
(fig.9), keeping the hands away from moving machine parts.
5.2 OVERALL DIMENSIONS (MM)
Max. lenght
B = 880 mm
Min. width
E = 1320 mm
Max. width
C = 1880 mm
Max. height
A = 1640 mm
24
Mod.
V
A
kW
Hz
Ph
bar7psi
Port.max
NOTICE
WARNING
ISO9001
QUAL. SYS. CERTIFIED
ANNO DI COSTRUZIONE /
Code
MANUFACTURED
X-XXXXXXXX/XX - XX
Serial N.
XXXXXXXXX
C
AS 944 TI User Manual
8
A
B
9
Publicité
