Publicité
Les langues disponibles
Les langues disponibles
8.
If something does not work
8.12. Resetting the error message
Notice:
Only allow work on electrical components/assemblies to be carried out by qualified
electricians who work in accordance with electrical rules and regulations.
Switch the controller off, disconnect it from the mains and make sure that it cannot be
switched on again.
1.
Switch the controller off at the main
switch (1).
2.
Disconnect the controller from the mains and
make sure that it cannot be switched on
again.
3.
Rectify the fault.
4.
Reconnect the controller to the mains.
5.
Switch the controller on at the main
switch (1).
Resetting error 92 on the control panel
.
The final drying phase must have finished.
1.
In standby mode, clear the error message by
pressing symbol 92 (2).
PAGE 42
Sauna/SANARIUM
1
2
50701290/12.14
Publicité
