Publicité
Les langues disponibles
Les langues disponibles
7.
System settings
Call up the service menu
'
See page 21.
7.32. Service menu 31 - PIN, WLAN module PIN
Input:
Personal PIN (WLAN module)
Any four-digit number can be used as your PIN except for "1111" and "2222".
Enter your four-digit PIN into the controller to configure the WLAN module.
Number = 1111
'
There is no WLAN module installed or the WLAN module is installed but deactivated.
Default = 2222
'
WLAN module installed and activated.
.
The WLAN module installed in the controller provides a wireless ad-hoc network for completing
the configuration process.
7.33. Service menu 32 - DIM, backlighting
.
Brightness settings of backlighting when dimmed.
Input:
Default = 20%
7.34. Service menu 33 - ALG, algorithm
Input:
0
=
Algorithm 16033
7.35. Service menu 34 - SM_I, Setting the sauna heater type
.
Setting the sauna heater type for monitoring the heat-up phase for remote start, preset time mode
or the app.
Input:
0
=
Increase of 5 Kelvin within 3 minutes
(default), Majus/Sanarium M sauna
heaters 6-12 kW, Pluris/Pluris
Softlcima 4.5-9 kW, Trumpf 3-9 kW,
Softclima 3-7.5 kW
2
=
Increase of 5 Kelvin within 5 minutes,
Pluris Softclima sauna heater 3 kW
4
=
Not used
PAGE 28
Can be set between 10% and 75% to the
nearest 5%
1
=
Algorithm 18033 (default)
1
=
Increase of 5 Kelvin within 2 minutes,
Majus sauna heaters 16-30 kW,
Pluris Softclima 12 kW, Softclima
9 kW
3
=
Not used
5
=
Individual heat-up curve. Calibration
via service menu point 35
Sauna/SANARIUM
50701290/12.14
Publicité
